iFixit: the Switch 2 Pro is a ‘piss-poor excuse for a controller’

iFixit has shared a full teardown video of the Switch 2 Pro controller and is not impressed by how difficult it is to access the $85 accessory’s internal components, including its rechargeable battery that will inevitably lose its ability to hold a charge over time.

The online repair site goes so far as to call the Pro 2 a “piss-poor excuse for a controller” for several different reasons. Opening the controller requires you to first forcefully remove a faceplate held in place by adhesive tape before a single screw is visible. But you’ll need to extract several other parts and components, including the controller’s mainboard, before its battery is even accessible.

As previously revealed, the Pro 2 is still using older potentiometer-based joysticks that are prone to developing drift over time. They do feature a modular design that will potentially make them easier to swap with third-party Hall effect or TMR replacements, but reassembling the controller after that DIY upgrade will require you to replace all the adhesive tape you destroyed during disassembly.